GE FANUC Parts
Total Parts:
11,517
| Part Number | Description | Price |
|---|---|---|
| IC697VAL264 | ANALOG INPUT, 64 CHANNEL, JUMPER SELECTABLE FOR 0 TO 5VDC, 0 TO 10VDC,+/-2.5VDC, +/-5VDC, +/-10VDC.16 BIT RESOLUTION. | $6,423.00 |
| IC697VAL301 | ANALOG OUTPUT, 12 BIT 32 CHANNEL, 0-10VDC, 0-5VDC, +/-2.5VDC, +/-5VDC, +/-10VDC | $7,191.00 |
| IC697VAL304 | ANALOG OUTPUT, ISOLATED, 4 CHANNEL, 12 BIT, VOLTAGE - BIPOLAR +/-2.5VD C, +/-5VDC, +/-10VDC. REMOVABLE TERMINAL BLOCK, NO CABLE REQUIRED | $3,213.00 |
| IC697VAL306 | ANALOG OUTPUT, 12 BIT, 16 CHANNEL, NON ISOLATED, VOLTAGE/CURRENT JUMPE R SELECTABLE VOLTAGE 0-10VDC, 0-5VDC, +/-2.5VDC, +/-5VDC, +/-10VDC OR CURRENT 0 TO 20MA, 4 TO 20MA, AND 5 TO 25 MA | $4,207.00 |
| IC697VAL308 | ANALOG OUTPUT, ISOLATED, 8 CHANNEL, 12 BIT, VOLTAGE - BIPOLAR +/-2.5VD C, +/-5VDC, +/-10VDC. REMOVABLE TERMINAL BLOCK, NO CABLE REQUIRED | $4,513.00 |
| IC697VAL314 | ANALOG OUTPUT, ISOLATED, 4 CHANNEL, 12 BIT, CURRENT - 4 TO 20MA. REMO VABLE TEMRINAL BLOCK, NO CABLE REQUIRED | $1,987.95 |
| IC697VAL318 | ANALOG OUTPUT, ISOLATED, 8 CHANNEL, 12 BIT, CURRENT - 4 TO 20MA. REMO VABLE TERMINAL BLOCK, NO CABLE REQUIRED | $4,932.00 |
| IC697VAL324 | ANALOG OUTPUT, ISOLATED, 4 CHANNEL, 12 BIT, VOLTAGE - POLAR 0 -10VDC, 0-5VDC. REMOVABLE TERMINAL BLOCK, NO CABLE REQUIRED | $3,213.00 |
| IC697VAL328 | ANALOG OUTPUT, ISOLATED, 8 CHANNEL, 12 BIT, VOLTAGE - POLAR 0-10VDC, 0 -5VDC. REMOVABLE TERMINAL BLOCK, NO CABLE REQUIRED | $4,932.00 |
| IC697VAL348 | ANALOG OUTPUT, 8 CHANNEL, 16BIT, VOLTAGE BIPOLAR 0 TO +/-10VDC | $5,246.00 |
| IC697VDD100 | DIGITAL INPUT, 24VDC, SOURCE, 64 POINT. IN ADDITION, THE MODULE CAN B E CONFIGURED FOR SOE (SEQUENCE OF EVENT) RECORDING. UP TO 3,000 EVENT BUFFER | $2,303.00 |
| IC697VDD125 | 125VDC/SOE INPUT MODULE 64 POINT SOURCE MODULE IS VME BASED AND MAY REQUIRE VME READ/WRITE COMMANDS. | $2,517.00 |
| IC697VDQ120 | DIGITAL OUTPUT, 64 POINT, 24VDC AT 500MA, SINK OR SOURCE, 64 POINT. NOT UL APPROVED | $2,039.00 |
| IC697VDR150 | RELAY OUTPUT, 32 POINT, NON LATCHING, 2 AMP. NOT UL APPROVED | $2,383.00 |
| IC697VDR151 | RELAY OUTPUT, 64 PINT, NON LATCHING, 2 AMP. NOT UL APPROVED | $2,689.00 |
| IC697VHD001 | 10GIG HARD DRIVE FOR SINGLE BOARD COMPUTER (IC697VSC096) | $1,348.00 |
| IC697VPC462 | COPROCESSOR MODULE PLUG&PLAY 486DX2/66 8MBYTES | $2,794.00 |
| IC697VPC463 | PLUG & PLAY PC COPROCESSOR, 486DX2/66, 16 Mbytes V | $9,716.00 |
| IC697VPC464 | PLUG & PLAY PC COPROCESSO | $12,800.00 |
| IC697VRD008 | RTD STRAIN BRIDGE MODULE. SUPPORTS 8 CHANNELS OF 100 OHM PLATINUM RTD OR + -30MV AND + -100MV VOLTAGE INPUTS. 12BITS PLUS SIGN. MODULE HAS A REMOVABLE TERMINAL STRIP, NO CABLE REQUIRED | $2,072.72 |
| IC697VRM015 | REFLECTIVE MEMORY WITH 256KBYTE MEMORY & 512 TRANSFER FIFO.170MBAUD FIBER OPTIC NETWORK.SUPPORTS UP TO 256 NODES OVER 2,000 METERS | $4,434.00 |
| IC697VSC096 | SINGLE BOARD COMPUTER, WITH 32MBYTE SDRAM AND 96 MBYTE FLASH. NO OPERAT ING SYSTEM PRE LOADED | $5,221.00 |
| IC698CHS017 | RX7I 17 SLOT RACK WALL (REAR) MOUNT | $947.50 |
| IC698CHS017A | RACK 17 SLOTS REAR MOUNT | $663.00 |
| IC698CHS117 | RX7I 17SLOT RACK FRONT MOUNT | $947.50 |
| IC698CHS217A | RX7I 17SLOT RACK MT WITH READ I O ACCESS | $1,274.00 |
| IC698CPE010 | RX7I 300MHZ CPU WITH ETHERNET 10 100 | $11,820.00 |
| IC698CPE020 | CPU MODULE RX7I 700MHZ W/ETHERNET 10/100 | $16,048.00 |
| IC698CPE030 | RX7I PENTIUM M CPU - 600MHZ WITH 64 MEG OF USER MEMORY. NO FAN REQUIRED.CPU INCLUDES BUILT-IN ETHERNET WITH SWITCH AND 2 SERIAL COMMUNICATION PORTS. | $16,547.00 |
| IC698CRE020 | PACSYSTEMS RX7I HIGH AVAILABILITY 700MHZ CPU | $15,476.00 |